Modular L3 Ethernet Switch User's Guide
Figure 6- 189. Element Statistics window
2.
Select the MIB required variables by one of the following methods:
◊
Double-click on the variable in the Optional Counters box. The variable is moved to the
Selected box.
◊ Select the variable in the Optional Counters box and click
the Selected box.
To remove a selected variables use one of the following methods:
1.
Double-click on the variable in the selected box.
2.
Select the variable Selected box and click
To save a graph configuration use one of the following methods:
To load a previously saved graph configuration use one of the following methods:
1.
Click Graph, then click Load configuration from file. An Open File window opens:
♦ Click
. The configuration file can be edited with a standard editor
or
.
211
. The variable is moved to