Modular L3 Ethernet Switch User's Guide
♦ IfIndex – Identifies the port number for which the IGMP filter is enabled.
♦ From Address – Indicates the IP address being filtered from.
♦ To Address – Indicates the IP address being filtered to.
♦ Up Time – Indicates in ticks the amount of time that has passed since the entry was created.
♦ Action – This parameter is used to fine-tune the IGMP filter.
◊
Permit – Whether the indicated packets should be forwarded.
◊
Deny – Whether the indicated packets should be blocked. .
To add an IGMP Filter entry:
1.
Display the IGMP Filter Table.
2.
Click
. The IGMP Filter Entry - Insert window opens:
Figure 6- 137. IGMP Filter Entry - Insert window
3.
Complete the fields. The fields are the same as the IGMP Filter Table as described above.
4.
Click
. The IGMP Filter Entry - Insert window closes.
5.
Click
to update the device. When the Status field displays "Finished!" the IGMP information
is saved to the device.
To edit an IGMP Filter entry:
1.
Display the IGMP Filter Table.
2.
Select an entry in the IGMP Filter Table and click
opens.
or
Double-click a row in the IGMP Filter Table. The IGMP Filter Entry - Edit window opens:
. The IGMP Filter Entry - Edit window
163