D-Link DES-6300 User Manual page 60

Modular L3 Ethernet Switch User's Guide
10/100
Coll
B.P. (Back
Clickure)
Act
FD (Full Duplex)
Tx
Rx
Table 6-4. Color Codes for the Status LED
View Port Status
To view a specific port status:
1. Click a port to select it. Selected ports are highlighted in blue.
2. Right-click a port to open a context-sensitive menu. There are two menu selections:
♦ Refresh Port – The port status is refreshed
♦ Port Properties – Displays the port configuration
3. Double-click a port.
or
Click Ctrl+T
or
Click the
4. Select a port and click Ctrl+P to open the Port Statistics window for other configuration
options.
Refreshing the Front Panel Display
To view the current device and interface status, the front panel display can be refreshed.
To refresh the front panel display:
1. Click Ctrl+R
or
Click .
or
Select Services > Refresh Device Version. The Check Version for window opens:
and active
LED Off—Link is down
LED On—100Tx
LED Off—10BaseT
LED On—Collision occurs
LED On—Receive buffer threshold
number is exceeded
LED On—Activity in the link
LED On—Full Duplex
LED Off—Half Duplex
LED On—Link is transmitting
traffic
LED On—Link is receiving traffic
to open the Port Properties window for other configuration options.
and active
LED Off—Link is down
LED On—1000 Mbps
N/A
N/A
LED On—Activity in the link
LED On—Full Duplex
LED Off—Half Duplex
LED On—Link is transmitting
traffic
LED On—Link is receiving traffic
60