D-Link DES-6300 User Manual page 115

Modular L3 Ethernet Switch User's Guide
5. Click . When the Status field displays "Finished!", the entry is saved to the device.
Rapid STP Force Version Table
The Rapid STP Force Version Table contains information specific to Rapid STP.
To display the Rapid STP Force Version Table:
♦ Select Bridge > Rapid Spanning Tree > Force Version Table. The Rapid STP Force Version
Table opens:
Figure 6- 81. Rapid STP Force Version Table window
The Rapid STP Force Version Table displays the following:
♦ VLAN – The VLAN number to which the VLAN belongs.
♦ State – Specifies if the bridge is currently using:
◊
Normal RSTP – Rapid STP Bridge Protocol Data Units (BPDU) are transmitted unless
a legacy system is detected by a port.
◊
STP Compatibility – Indicates the rapid transition of alternate ports to root ports.
Rapid STP transmits the configuration BPDUs and the Topology Change Notification
(TCN) BPDUs only. Rapid STP BPDUs are discarded.
To edit an entry in the Rapid STP Force Version Table:
1. Display the Rapid STP Force Version Table.
2. Double-click an entry in the Rapid STP Force Version Table.
Click . The RStp Force Version Table - Edit window opens:
or
115