D-Link DES-6300 User Manual page 66

Modular L3 Ethernet Switch User's Guide
2. In the File Name field, enter the device configuration file, or click
configuration file name.
3. If the default TFTP server provided with the device is not required, check the "External TFTP
Server IP Address" checkbox and enter the external TFTP server IP address. To use the default
TFTP server, clear the "External TFTP Server IP Address" checkbox.
4. Click . The file saving procedure begins. The configuration file is retrieved from the server.
The procedure progress is illustrated by the Progress Status incremental bar. When the
incremental bar indicates that the procedure is completed, the file is retrieved.
Configuration File - Conversion
The Configuration File - Conversion screen is used to translate the configuration file from BER to
ASCII format, edit the configuration file and then translate the file back from ASCII to BER format.
Note: Using the Configuration File – Edit button on the Configuration File - Conversion window
to edit the configuration file in ASCII should be done only by authorized personnel familiar with
the format, otherwise the procedure may result in configuration download errors.
Update Device Software
D-Link Corporation may release updated software versions of the device software. Software files reside
on the web server computer and are downloaded from the ConfigMaster\Nms\Configuration
directory.
Note: If download is not successful, the current device software version does not change. If download
is successful, new software is not implemented until the device is reset.
To update the configuration device software:
1. Select File > Update Device Software. The Update Device Software window opens:
Figure 6- 28. Update Device Software window
2. In the File Name field, enter the Web server directory software file
66
to locate the device