D-Link DES-6300 User Manual page 144

Modular L3 Ethernet Switch User's Guide
The OSPF Neighbors Table Interface displays the following parameters:
♦ Neighbor's Address – The neighbor IP address.
♦ Router ID – A unique neighboring router identifier in the autonomous system.
♦ Priority – The priority of this neighbor. A priority of 0 means that this neighbor is not eligible
to become the designated router on this network.
♦ Neighbor State – The relationship with neighbor state. The possible values are:
◊
Down
◊
Attempt
◊
Ini
◊
Two Way
◊
Exchange Start
◊
Exchange
◊
Loading
◊
Full.
Routing Table
To display the IP Routing Table:
♦ Select Router > IP > Routing Table. The IP Routing Table opens:
Figure 6- 114. IP Routing Table window
The IP Routing Table displays the following parameters:
♦ Dest IP Address – The destination IP address of this router.
♦ Network Mask – The destination network mask of this route.
♦ Next Hop – Address of the next system in this route, central to the interface.
♦ Interface Number – The central interface Index through which the next hop of this route is
reached.
144