D-Link DES-6300 User Manual page 151

Modular L3 Ethernet Switch User's Guide
Figure 6- 122. DHCP Relays Table window
The DHCP Relays Table window displays the following parameters:
♦ Next Server Address – The DHCP server IP address. The device acts as a DHCP relay if this
parameter is not equal to 0.0.0.0.
♦ Threshold – DHCP requests are relayed only if their SEC field is greater or equal to the
threshold value, in order to allow local DHCP servers to answer first.
To add a DHCP Relays Table entry:
1. Display the DHCP Relays Table window.
2. Click . The rsDHCP Multiple Relays Entry - Insert window opens:
Figure 6- 123. rsDHCP Multiple Relays Entry – Insert window
3. Complete the fields.
4. Click .
5. Close the rsDHCP Multiple Relays Entry - Insert window. The DHCP Relays Table opens.
6. When the Status field displays "Finished!", the fields are confirmed as modified.
To edit a DHCP Relays Table entry:
1. Display the DHCP Relays Table window.
151