D-Link DES-6300 User Manual page 52

Modular L3 Ethernet Switch User's Guide
Figure 6- 18. General Traps Table
The General Traps Table displays the following information:
♦ Trap Number – A consecutive number given to each event to make information
retrieval more efficient.
♦ Severity – The event level, which can be one of the following: Informational, Warning,
Error, or Fatal.
♦ Date and Time – When the trap occurred.
♦ Source – The device IP address sending the trap.
♦ Information – An event description. For example, Link Up.
To view a device front panel display from the trap source:
♦ Double-click a trap in the General Traps Table to open the device front panel display
that sent the trap.
To set an alarm when receiving traps:
♦ Click the "Beep when a trap arrived" checkbox to hear the beep every time a new trap
arrives.
The General Traps Table has the following icons on the toolbar:
Icon Function
Delete General Traps Table entries.
Save the General Traps Table. The Status bar displays the file
path to which the trap has been saved:
<ConfigMaster>/Nms/Configuration/traps.dat.
Configuring Trap Parameters
To configure the number of traps displayed in the General Traps Table and how many traps
stored in a file:
♦ From the General Options window Menu Bar click
The Saved traps window opens:
, then select Traps Configuration.
52