D-Link DES-6300 User Manual page 84

Modular L3 Ethernet Switch User's Guide
♦ Back Pressure set to Enable – HOL automatically resets to OFF
Note: If a configured port goes down due to either an Administrative or physical link, the HOL resets to
ON even if the Flow Control on port was configured to ON.)
To edit an Other tab field:
1. Display the Port Properties Main tab.
2. Edit the required field.
3. Click . When the Status field displays "Finished!", the fields are confirmed as modified.
The following figure illustrates the Port Parameters window VLAN tab:
Figure 6- 48. Port Properties – VLAN tab
The VLAN tab displays the following fields:
♦ lf Number/Name/MAC Address – The number/name/MAC address of VLANs in which the
selected port is included.
84