D-Link DES-6300 User Manual page 137

Modular L3 Ethernet Switch User's Guide
♦ Leak External Direct Routes – Controls direct route redistribution that is external to OSPF
into OSPF. If this parameter is enabled all external routes are advertised into OSPF as external
routes.
To edit OSPF parameters:
1. Display the OSPF Parameters window.
2. Modify the required fields.
3. Click . When the Status field displays "Finished!", the fields are confirmed as modified.
OSPF Interface Parameters
To display the OSPF Interface Table:
♦ Select Router > IP > OSPF II > Interface Parameters. The OSPF Interface Table opens:
Figure 6- 106. OSPF Interface Table window
The OSPF Interface Table displays the following fields:
♦ IP Address – The OSPF interface IP address.
♦ Area ID – The area IP address.
♦ If Type – The interface type, such as Broadcast.
♦ If State – The OSPF interface states are the following:
◊
Down – The OSPF interface is down.
◊
Loopback – The OSPF interface is in a Loopback state.
◊
Waiting – The OSPF interface is currently waiting.
◊
Point to Point – The OSPF interface is in a point to point state.
◊
Designated Router – The OSPF interface is the designated router.
◊
Backup Designated Router – The OSPF interface is the backup designated router.
◊
Other Designated Router – Other routers are the designated and backup routers.
♦ Designated Router – The designated router IP address.
137