D-Link DES-6300 User Manual page 53

Modular L3 Ethernet Switch User's Guide
Figure 6- 19. Saved traps window
The following parameters are displayed in the Saved traps window:
♦ Maximal number of traps to display – How many traps are displayed in the General
Traps Table. By default, 500 traps can be displayed.
♦ Maximal number of traps to keep in file – How many traps to store in a file. The
default value is 5000, i.e. 5000 traps are stored by the system in the file called
autotraps.dat.
The maximal number of traps to keep on file must be greater than the maximal number of traps to
display. For example, with maximal number of traps to display set to 100 and maximal number of traps
to keep in file set to 300. If 150 new traps arrive, the most recent 100 traps are displayed in the Traps
Table and the rest of the new traps (50 traps arrived earlier than the 100 traps displayed in the Table)
are stored in the autotraps.dat file.
Enter the two parameters and click
General Options Configuration
In the left pane click
. The configuration is saved and the General Traps Table opens.
to display the General Options - Configuration window:
53