D-Link DES-6300 User Manual page 227

Modular L3 Ethernet Switch User's Guide
The Traps Table window has the following icons on the toolbar.
Traps Table Icons on the Toolbar
Icon Function
Delete Traps Table entries.
Save the Traps Table. The Status bar displays the file path to which the trap has
been saved: <ConfigMaster>/Nms/Configuration/traps.dat.
Show Trap files.
To view the General Traps Table:
1. There are two methods of displaying the General Options window is as follows:
♦ From the Main window click Options.
♦ On the Menu Bar, click Statistics. On the Statistics menu, click Traps Table. The General
Options window opens. The default tab is General Traps Table.
2. If the Configuration tab is open, click the traps icon in the left pane.
The General Traps Table opens in the right panel.
To view the Trap Files:
♦ On the General Options - General Traps Table window click. The Saved traps
window opens:
Figure 6- 206. Saved traps window
The columns displayed in the Saved traps window are the same as displayed in the General Options -
Traps Table.
There are two types of Saved traps tables:
To view the device front panel from the trap source:
♦ Autotrap File
♦ Trap File
227