D-Link DES-6300 User Manual page 77

Modular L3 Ethernet Switch User's Guide
1. Display the VLAN Table window.
2. In the VLAN Table window, click
Figure 6- 43. VLAN Table Insert window
3. Complete the fields. The fields are the same as the VLAN Table as described above.
4. Double-click a port in the Port List. The port number appears in the Device Table, but no longer
displays in the Available Ports List. When the port is removed from the VLAN the port redisplays
in the Available Port List. The Selected Ports list displays the following fields:
♦ VLAN Port Number – Indicates the port index number attached to the VLAN.
♦ VLAN Port Type – Indicates if the port is static or active.
♦ Tagging – Identifies the VLAN to which the frame belongs. To enable port tagging check the
Enable port tagging checkbox.
♦ Forbidden Egress Port – Indicates ports that are forbidden to be included in the Egress Ports
List for this VLAN.
5. Click to apply the new data.
6. Close the VLAN Table Insert window.
. The VLAN Table Insert window opens:
77