D-Link DES-6300 User Manual page 176

Modular L3 Ethernet Switch User's Guide
Figure 6- 150. IPX Router Interface Parameters Edit window
4. Click the RIP Parameters button to modify IPX RIP parameters. The IPX RIP Parameters
window opens:
Figure 6- 151. IPX RIP Parameters window
The IPX RIP Parameters window displays the following parameters:
♦ Update Interval – RIP periodic update interval, in seconds. Set to 0 to disable periodic
messages. When set to 0, all entries learned on this interface are not aged out.
♦ Age Multiplier – Holding multiplier for information received in RIP periodic updates. This
value multiplied by the update interval defines how many seconds RIP information remeins
without being refreshed. Set to 0 to prevent the entries learned on this interface from being aged
out.
♦ Status – Whether the RIP interface is active. OFF is inactive but not deleted.
Note: The Update Interval multiplied by the Age Multiplier must be less than 2 million.
1. Complete the IPX RIP Parameters window fields if required.
2. Click . Close the IPX RIP Parameters window. The IPX Router Interface Parameters Edit
window opens.
176