D-Link DES-6300 User Manual page 76

Modular L3 Ethernet Switch User's Guide
Figure 6- 42. VLAN Table window
The VLAN Table window displays the following fields:
♦ IF Num – The VLAN interface number, automatically assigned by the management station.
♦ Protocol Type – Indicates the type of protocol used. The possible value is Predefined Protocol.
The type of predefined protocol used in defined in the Protocol field.
♦ Protocol – Specifies the VLAN protocol type. The possible values are:
◊ IP
◊ IPX Raw
◊ IPX ET
◊ IPX LLC
◊ IPX SNAP
◊ Dec Net
◊ Net Bios
◊ SNA
◊ Other
♦ Name – Indicates the user-defined VLAN name.
♦ Priority – Indicates the value of the priority tag. The possible value is 0-7.
♦ MAC Address – Permanent VLAN MAC address, automatically assigned by the device. This
parameter applies to IP and IPX VLANs only, and is dependent on the VLAN address type.
♦ Address Type – Indicates the MAC address type being used. The possible values are:
◊ Default – The VLAN receives the device MAC address.
◊ Reserved – The VLAN is assigned a unique MAC address based on the order of which it
was configured (0-4096 reserved MAC addresses).
♦ Tag – Indicates if the VLAN tag is used to identify to which VLAN a packet belongs.
To add new VLANs for VLANs per Port and Protocol:
76