20
Viewing and editing encryption group properties
General tab
The General tab
the General tab, select a group from the Encryption Center Devices table, then select Group >
Properties from the menu task bar.
NOTE
You can also select a group from the Encryption Center Devices table, then click the Properties icon.
FIGURE 329
The dialog box contains the following information:
698
(Figure
329) is viewed from the Encryption Group Properties dialog box. To access
Encryption Group Properties dialog box - General tab
•
Encryption Group Name: The name of the encryption group
•
Group Status: The status of the encryption group. Options are:
•
OK-Converged: The group leader can communicate with all members
•
Degraded: The group leader cannot contact one or more of the configured group
members. When the group is in a degraded state, many operations are not permitted,
including configuring targets, hosts, LUNs, HA clusters, and tape pools.
•
Deployment Mode: The group's deployment mode, which is transparent mode
•
Failback Mode: Identifies the group's failback mode. Options are: Automatic and Manual.
Failback mode can be changed by clicking on the field and selecting the desired mode.
The HA Failback option determines the behavior when a failed encryption engine is
restarted. When one encryption engine in an HA cluster fails, the second encryption
engine in the HA cluster takes over the encryption and decryption of traffic to all
encryption targets in the first encryption engine.
Brocade Network Advisor SAN User Manual
53-1002696-01