Editing A Vm Manager - Brocade Communications Systems StoreFabric SN6500B User Manual

4
VM Manager discovery
8. Select the Forward event to vCenter check box to enable event forwarding from the
9. Click OK on the Add VM Manager dialog box.
10. Click Close on the Discover VM Managers dialog box.

Editing a VM manager

To edit VM manager discovery, complete the following steps.
1. Select Discover > VM Managers.
2. Select the Host in the Discovered VM Managers list and click Edit.
3. Change the VM manager port number in the Port field.
4. Enter the VM manager username in the User ID field.
5. Enter the VM manager user password Password field.
6. Select the Enable display of network information in vSphere client check box to enable
7.
8. Click OK on the Edit VM Manager dialog box.
9. Click Close on the Discover VM Managers dialog box.
70
Management application to vCenter.
Clear to disable event forwarding.
If an error occurs, a message displays. Click OK to close the error message and fix the problem.
A VM manager displays in Discovered VM Managers table with pending status. To update the
status from pending you must close and reopen the Discover VM Managers dialog box.
The Discover VM Managers dialog box displays.
The Edit VM Manager dialog box displays.
FIGURE 20
Edit VM Manager dialog box
vSphere client plug-in registration.
Clear to disable vSphere client plug-in registration.
Select the Forward event to vCenter check box to enable event forwarding from the
Management application to vCenter.
Clear to disable event forwarding.
If an error occurs, a message displays. Click OK to close the error message and fix the problem.
Brocade Network Advisor SAN User Manual
53-1002696-01