1
Management server and client
7.
Launching a remote client
To launch a remote client, complete the following steps.
1. Open a web browser and enter the IP address of the Management application server in the
2. Click the Management application web start link.
3. Log into another server by entering the IP address to the other server in the Network Address
4. Remove a server from the Network Address list by selected the IP address and clicking Delete.
5. Enter your user name and password.
6. Select or clear the Save password check box to choose whether you want the application to
7.
8. Click OK on the Login Banner dialog box.
4
Click OK on the Login Banner dialog box.
The Management application displays.
NOTE
When you launch the Management application or navigate to a new view, the SAN tab displays
with a gray screen over the Product List and Topology Map while data is loading.
Address bar.
If the web server port number does not use the default (443 if is SSL Enabled; otherwise, the
default is 80), you must enter the web server port number in addition to the IP address. For
example, IP_Address:Port_Number.
The Management application web start screen displays.
The Log In dialog box displays.
field.
NOTE
The server must be the exact same version, edition, starting port number, and network size as
the client.
The defaults are Administrator and password, respectively. If you migrated from a previous
release, your username and password do not change.
NOTE
Do not enter Domain\User_Name in the User ID field for LDAP server authentication.
remember your password the next time you log in.
Click Login.
The Management application displays.
NOTE
When you launch the Management application or navigate to a new view, the SAN tab displays
with a gray screen over the Product List and Topology Map while data is loading.
Brocade Network Advisor SAN User Manual
53-1002696-01