26
Port VLANs
Adding VLAN properties
The Add VLAN dialog box has two tabs: Ports and Properties. The VLAN properties vary for different
products, for example:
•
•
•
To add VLAN properties, complete the following steps.
1. On the Add VLAN dialog box, click the Properties tab.
2. Click the VLAN View option to view the products to which the VLANs are to be deployed, or click
3. Select the Fabric OSVLAN type from the Target Context list. You must select only one VLAN type.
862
When an IOS VLAN is selected, the Name, QoS, Spanning Tree and Router Interface fields and
Transparent Flooding enable check box display.
When a DCB VLAN or product is selected and moved to the Products/VLAN list, the Name and
Admin Status fields and the FCoE check box display. All the fields displayed for DCB products
are read-only.
Network OS products do not display.
The Add VLAN dialog box—Properties tab, shown in
FIGURE 386
Add VLAN dialog box—Properties tab
the Product View option to display the VLANs that are to be deployed to that product.
If multiple VLAN types are selected, the target context becomes the default and an error
message displays.
Figure
386, displays.
Brocade Network Advisor SAN User Manual
53-1002696-01