Viewing Ports; Port Types; Showing Connected Ports - Brocade Communications Systems StoreFabric SN6500B User Manual

Viewing ports

To view ports on the Connectivity Map, right-click a product icon and select Show Ports.
NOTE
Show Ports is not applicable when the map display layout is set to Free Form (default).
NOTE
This feature is only available for connected products. On bridges and CNT products, only utilized
Fibre Channel ports display; IP ports do not display.

Port types

On the Connectivity Map, right-click a switch icon and select Show Ports. The port types display
showing which ports are connected to which products.
NOTE
Show Ports is not applicable when the map display layout is set to Free Form (default).
NOTE
This feature is only available for connected products. On bridges and CNT products, only utilized
Fibre Channel ports display. IP ports do not display.
TABLE 50
Port Type
D
E
EX
F
FL
VE
VEX

Showing connected ports

You can jump from a port to its connected port.
1. Right-click the product whose port connection you want to determine and select Show Ports.
2. Right-click a port and select Connected Port.
Brocade Network Advisor SAN User Manual
53-1002696-01
Port types
Description
A port in diagnostic mode.
An expansion port connecting two Fibre Channel switches.
On a Fibre Channel Router, a connection between a fibre channel router and a
fibre channel switch
On a Fibre Channel switch, a port that supports an N_Port.
An N_port or F_port that supports arbitrated loop functions associated with
arbitrated loop topology.
A virtual E_port configured for an FCIP Tunnel.
A virtual EX_port configured in an FCIP Tunnel.
The product's ports display.
The focus jumps to the connected port and the connection is highlighted.
12
Ports
361