Brocade Communications Systems StoreFabric SN6500B User Manual page 662

20
Creating a new encryption group
FIGURE 255
1. Enter the IP address or host name for the primary key vault.
2. Enter the name of the file that holds the primary key vault's public key certificate, or browse to
3. Enter the password you created for the Brocade group TEKA client.
4. If you are using a backup key vault, enter the IP address or host name, the name of the file
5. Click Next.
614
Select Key Vault dialog box for TEKA
the desired location.
holding the backup key vault's public key certificate in the fields provided, and the user name
and password for the backup key vault.
The Specify Master Key File Name dialog box displays (Figure 256).
Brocade Network Advisor SAN User Manual
53-1002696-01