2. Select Compare from the Zone DB Operation list.
3. Select the database for the first fabric from the Reference Zone DB list.
4. Select the database for the second fabric from the Editable Zone DB list.
5. Set up a zone configuration that contains the active zones in both fabrics:
6. Click Save As to save the editable zone database in the offline repository for the second fabric.
7.
8. Click Close to close the Compare/Merge Zone DBs dialog box and return to the Zoning dialog
9. In both fabrics, load the offline repository and activate the zone configuration from
Saving a zone database to a switch
1. Select Configure > Zoning > Fabric.
2. Select a zone database from the Zone DB list.
3. Select Save to Switch from the Zone DB Operation list.
4. Click Yes on the confirmation message.
5. Click OK to save your work and close the Zoning dialog box.
Exporting an offline zone database
NOTE
You cannot export an online zone database.
1. Select Configure > Zoning > Fabric.
2. Select an offline zone database from the Zone DB list.
3. Select Export from the Zone DB Operation list.
4. Browse to the location where you want to export the zone database file (.xml format).
Brocade Network Advisor SAN User Manual
53-1002696-01
The Compare/Merge Zone DBs dialog box displays, as shown in
a. Select the name of the active zone configuration from the Reference Zone DB area.
b. Select the name of the active zone configuration in the Editable Zone DB area.
c.
Click Merge.
All of the active zones from both fabrics are now in one zone configuration.
Click Save As again, and select the name of the first fabric from the Fabric list to save the
editable zone database in the offline repository for the first fabric.
box.
Refer to
"Activating a zone configuration"
The Zoning dialog box displays.
The selected zone database is saved to the fabric without enabling a specific zone
configuration.
The Zoning dialog box displays.
The Export Zone DB dialog box displays.
Zoning configuration
Figure
on page 729 for instructions.
21
339.
step
b.
737