Importing Hosts From A Vm Manager - Brocade Communications Systems StoreFabric SN6500B User Manual

4
Host discovery
12. Click OK on the Add Host Adapters dialog box.
13. Click Close on the Discover Host Adapters dialog box.

Importing Hosts from a VM manager

To discover Hosts from a discovered VM manager, complete the following steps.
1. Select Discover > Host Adapters.
2. Click Add.
3. Enter a discovery request name (such as, MyVMManager) in the Discovery Request Name
4. Select Hosts from VM Manager from the import by list.
5. Select All VM or an individual VM from the list.
6. Click Add.
7.
64
If an error occurs, a message displays. Click OK to close the error message and fix the problem.
A Host Group displays in Discovered Hosts table with pending status. To update the status from
pending you must close and reopen the Discover Host Adapters dialog box.
The Discover Host Adapters dialog box displays.
The Add Host Adapters dialog box displays.
FIGURE 16
Add Host Adapters dialog box
field.
All hosts which are part of a discovered VM manager and have a registered host name display
in the list. If no host with a registered host name exists, an error message displays. Click OK to
close the error message.
Configure Host credentials by choosing one of the following options:
•
To configure HCM agent credentials, select the HCM agent option. Go to step 9.
Brocade Network Advisor SAN User Manual
53-1002696-01