Creating An Aor - Brocade Communications Systems StoreFabric SN6500B User Manual

Creating an AOR

When creating an AOR, you assign devices or groups to that AOR. After you save the AOR, it can be
assigned to one or more user account. Users of those accounts can then view the devices or
groups in their assigned AOR. Users can deploy configurations and payloads only to devices in
assigned AORs.
When you create an AOR, it immediately becomes available in the Users dialog box.
To create an AOR, complete the following steps.
1. Select Server > Users.
2. Click Add under the AOR table.
3. Enter a name of the AOR in the Name field.
4. (Optional) Enter a short description for the AOR in the Description field.
5. Assign or remove products as needed.
6. Click OK to save the new AOR and close the Add AOR dialog box.
7.
Brocade Network Advisor SAN User Manual
53-1002696-01
The Users dialog box displays.
The Add AOR dialog box displays.
FIGURE 49
Users dialog box - Users tab
For step-by-step instructions, refer to
"Removing products from an AOR"
The new AOR displays in the AOR list of the Users dialog box.
Click Close to close the Users dialog box.
"Assigning products to an AOR"
on page 153.
Areas of responsibility
on page 153 or
6
151