Saving A Master Key To A Smart Card Set - Brocade Communications Systems StoreFabric SN6500B User Manual

FIGURE 313
4. Select Key Vault as the Backup Destination.
5. Enter the passphrase, which is required for restoring the master key. The passphrase can be
6. Re-enter the passphrase for verification, then click OK.
7.
8. Click OK. after you have copied the Key ID.

Saving a master key to a smart card set

1. Select Configure > Encryption from the menu task bar to display the Encryption Center
2. Select a group from the Encryption Center Devices table, then select Group > Security from the
3. Select Backup Master Key as the Master Key Action.
Brocade Network Advisor SAN User Manual
53-1002696-01
Backup Destination (to key vault) dialog box
between eight and 40 characters, and any character is allowed.
A dialog box displays that shows the Key ID. The Key ID identifies the storage location in the
key vault.
Store both the Key ID and the passphrase in a secure place. Both will be required to restore the
master key in the future.
dialog box (Refer to Figure 185
menu task bar.
The Encryption Group Properties dialog box displays with the Security tab selected.
The Backup Master Key for Encryption Group dialog box displays
on page 526).
20
Master keys
(Figure 314).
673