Creating a server certificate
1. From the Security tab, select CAs & SSL Certificates > SSL Certificates.
FIGURE 209
2. Under Create Certificate Request, enter your organization information in the fields provided,
3. Verify the server certificate status is shown as Request Pending.
Brocade Network Advisor SAN User Manual
53-1002696-01
Steps for connecting to a KMIP appliance (SafeNet KeySecure)
The Certificate and CA Configuration page displays
KeySecure Certificate and CA Configuration page
then click Create Certificate Request. (The example is using "Safenet75ServerCert" as the
server certificate name.)
After the page refreshes, the new certificate information is displayed in the Certificate List
table
(Figure
210).
(Figure
209).
20
577