20
Adding a switch to an encryption group
FIGURE 277
5. Select the group in which to add the switch, then click Next.
632
The dialog box contains the following information:
•
Encryption Groups table: Enables you to select an encryption group in which to add a
switch.
•
Member Switches table: Lists the switches in the selected encryption group.
NOTE
If you are creating a new encryption group, refer to
page 592.
Add Switch to Existing Encryption Group dialog box
The Specify Public Key Certificate (KAC) File Name dialog box displays
"Creating a new encryption group"
(Figure
Brocade Network Advisor SAN User Manual
on
278).
53-1002696-01