Refreshing The Port Connectivity View; Enabling A Port; Disabling A Port - Brocade Communications Systems StoreFabric SN6500B User Manual

12
Ports
TABLE 49
Field
Switch in Order Delivery
Switch IP
Switch Port Count
Switch Port Type
Switch Role
Switch Routing Policy
Switch Secure Mode
Switch Status
Switch Supplier Serial Number
Switch Version
Tag
Unit Type
User Port Number
Vendor

Refreshing the port connectivity view

To obtain configuration changes that occurred since the Port Connectivity View dialog box opened,
click Refresh.

Enabling a port

To enable a port from the port connectivity view, right-click the port you want to enable from the
Port Connectivity View dialog box and select Disable/Enable Port > Enable.

Disabling a port

To disable a port from the port connectivity view, right-click the port you want to disable from the
Port Connectivity View dialog box and select Disable/Enable Port > Disable.
358
Port connectivity properties (Continued)
Description
Whether switch in-order delivery is enabled.
The switch's IP address.
The number of ports on the switch.
The port type; for example, E-Port, F-Port, U-port, and so on.
The role of the switch; for example, subordinate.
Whether a routing policy, for example, port-based routing policy,
is enabled.
Whether switch secure mode is enabled.
The operational status. There are four possible operation
status values:
•
Up - Operation is normal.
•
Down - The port is down or the route to the remote
destination is disabled.
•
Disabled - The connection has been manually disabled.
•
Backup Active - The backup TCP port is active due to a
failover.
The serial number of the switch supplier.
The switch's version number.
The tag number of the port.
The switch unit type.
The port number of the user's device.
The hardware vendor's name.
Brocade Network Advisor SAN User Manual
53-1002696-01