20
Creating a new encryption group
8. Verify the information is correct, then click Next.
FIGURE 247
9. Review the post-configuration instructions, which you can copy to a clipboard or print for later,
10. Refer to
608
After configuration of the encryption group is completed, the Management application sends
API commands to verify the switch configuration. See
results"
on page 629 for more information.
The Next Steps dialog box displays
certificates for the encryption switch are displayed. These instructions are specific to the key
vault type.
Next Steps dialog box
then click Finish to exit the Configure Switch Encryption wizard.
"Understanding configuration status results"
"Understanding configuration status
(Figure
247). Instructions for installing public key
on page 629.
Brocade Network Advisor SAN User Manual
53-1002696-01