Configuring Routing Domain Ids - Brocade Communications Systems StoreFabric SN6500B User Manual

18

Configuring routing domain IDs

9. Configure LSAN zones in each fabric that will share devices.
Configuring routing domain IDs
Logical (phantom) domains are automatically created to enable routed fabrics. Two types of logical
domains are created:
•
•
You can change the domain IDs of these logical domains.
1. In the Product List or Connectivity Map, right-click the fabric for which you want to configure
2. Right-click anywhere in the Available Switches list and select Expand All in the right-click menu.
3. Select a logical domain, and click the right arrow button to move the switch to the Selected
4. Select a domain ID number from the Domain ID column in the Selected Switches list. The
5. Click OK.
510
For specific instructions, refer to
A front domain is created in edge fabrics for every interfabric link (IFL).
A translate (Xlate) domain is created in routed fabrics that share devices.
logical domains, and select Routing Domain IDs.
The Configure Routing Domain IDs dialog box is displayed
FIGURE 181
Configure Routing Domain IDs dialog box
The switch group for the fabric expands to display the logical domains.
Switches list.
Domain ID column lists unused domain IDs.
You may need to scroll right or drag the dialog box open further to see the Domain ID column.
"Configuring LSAN zoning"
Brocade Network Advisor SAN User Manual
on page 739.
(Figure 181).
53-1002696-01