5
SNMP Trap Registration settings
Configuring the Syslog listing port number
1. Select Server > Options.
2. Select Syslog Registration in the Category pane.
3. Enter the Syslog listening port number of the Server in the Syslog Listening Port (Server) field,
4. Click Apply or OK to save your work.
SNMP Trap Registration settings
You can automatically register the server as the trap recipient on products. If SAN products have
Informs enabled, the registration is for the Informs.
Registering a server as a SNMP trap recipient automatically
1. Select Server > Options.
2. Select Trap Registration in the Category pane.
FIGURE 33
3. Select the Auto register server as SNMP trap or informs recipient check box, if necessary.
4. Click Apply or OK to save your work.
Configuring the SNMP trap listing port number
1. Select Server > Options.
2. Select Trap Registration in the Category pane.
104
The Options dialog box displays.
The Syslog Registration pane displays
if necessary.
The default Syslog listening port number is 514 and is automatically populated.
The Options dialog box displays.
The Trap Registration pane displays
Options dialog box (Trap Registration pane)
This check box is selected by default.
The Options dialog box displays.
(Figure
32).
(Figure
33).
Brocade Network Advisor SAN User Manual
53-1002696-01