Brocade Communications Systems StoreFabric SN6500B User Manual page 542

17
Layer 2 access control list management
Editing an extended Layer 2 ACL configuration (Fabric OS)
To edit an extended Layer 2 ACL configuration on a Fabric OS device, complete the following steps.
1. Select the device and select Configure > Security > Layer 2 ACL > Product.
2. Select the ACL you want to edit in the ACLs list and click Edit.
3. To edit an existing ACL rule, complete the following steps.
4. To add a new ACL rule, complete
5. To delete an existing ACL rule, select the rule you want to edit in the ACL Entries list and click
6. Click OK on the Edit - Layer 2 ACL Configuration dialog box.
7.
Copying an extended Layer 2 ACL configuration (Fabric OS)
To copy an extended Layer 2 ACL configuration, complete the following steps.
1. Select the device and select Configure > Security > Layer 2 ACL > Product.
2. Select the ACL you want to copy in the ACLs list and click Duplicate.
3. Enter a new name for the ACL in the Name field.
4. To edit an existing ACL rule, complete the following steps.
494
The Device_Name - Layer 2 ACL Configuration dialog box displays.
The Configuration_Name Edit Extended Layer 2 ACL Configuration dialog box displays.
a. Select the rule you want to edit in the ACL Entries list and click the left arrow button.
b. Complete step 5 through
(Fabric OS)" on page 492.
The updated ACL entry displays in the ACL Entries list. To edit additional ACL entries,
repeat step 3.
configuration (Fabric OS)"
The new ACL entry displays in the ACL Entries list. To add additional ACL entries, repeat
the left arrow button.
The updated ACL displays in the ACL Entries list. To edit additional ACLs, repeat
step 6.
Click OK on the Device_Name - Layer 2 ACL Configuration dialog box.
The Deploy to Products - Layer 2 ACL dialog box displays. To save the configuration, refer to
"Saving a security configuration deployment"
The Device_Name - Layer 2 ACL Configuration dialog box displays.
The Duplicate - Layer 2 ACL Configuration dialog box displays with the default name 'Copy of
Original_Name'.
a. Select the rule you want to edit in the ACL Entries list and click the left arrow button.
b. Complete step 5 through
(Fabric OS)" on page 492.
The updated ACL entry displays in the ACL Entries list. To edit additional ACL entries,
repeat step 4.
step 12 in "Creating an extended Layer 2 ACL configuration
step 4 through step 12
on page 492.
on page 500
step 12 in "Creating an extended Layer 2 ACL configuration
in "Creating an extended Layer 2 ACL
step 2
Brocade Network Advisor SAN User Manual
53-1002696-01
step 4.
through