Deleting A Dcb Map; Assigning A Dcb Map To A Port Or Link Aggregation Group - Brocade Communications Systems StoreFabric SN6500B User Manual

16
QoS configuration

Deleting a DCB map

You cannot delete the DCB map of a 10 Gbps DCB/FC switch module. To delete the DCB map of an
8 Gbps DCB switch, complete the following steps.
1. Select Configure > DCB.
2. Select a switch, and click Edit.
3. Click the QoS tab on the Edit Switch dialog box.
4. Select one or more DCB maps.
5. Click the left arrow button.
6. When you have finished the configuration, click OK to launch the Deploy to Products dialog
7.
8. Click Start on the Deployment Status dialog box to save the changes to the selected devices.
9. Click Close to close the Deployment Status dialog box.

Assigning a DCB map to a port or link aggregation group

The Edit Port dialog box - QoS tab allows you to assign DCB maps to ports and LAGs on a selected
switch.
NOTE
QoS maps are created using the Edit Switch dialog box, accessible from the DCB Configuration
dialog box.
A port can have either a DCB map or a Traffic Class map assigned to it, but it cannot have both.
1. Select Configure > DCB.
2. Select a port or LAG, and click Edit.
3. Click the QoS tab on the Edit Port or Edit LAG dialog box.
458
The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.
The QoS dialog box displays.
The selected DCB map row is removed from the list.
box.
NOTE
With Fabric OS version 7.0 and later, there is only one DCB map (the default), which you cannot
delete.
Click OK after changing the attributes of the current deployment.
The Deployment Status dialog box launches.
The DCB Configuration dialog box displays, showing the status of all DCB-related hardware and
functions.
The QoS dialog box displays.
Brocade Network Advisor SAN User Manual
53-1002696-01