Brocade Communications Systems StoreFabric SN6500B User Manual page 218

7
Viewing Call Home configurations
170
•
Products List — Displays all discovered products. The list allows for multiple selections and
manual sorting of columns. This list displays the following information:
Product Icon — The status of the products' manageability.

Name — The name of the product.

IP Address — The IP address (IPv4 or IPv6 format) of the product.

Node WWN — The node world wide name of the product.

Fabric Name — The name of the fabric.

Vendor — The vendor ID of the product.

Call Home Status — One of the following Call Home statuses for the product.

- Enabled — The product is manageable and Call Home is enabled.
- Disabled — The product is manageable and Call Home is disabled.
- Not Manageable — The product is discovered but not manageable.
- Server Not Registered — The server is not registered to receive Call Home events
from the product.
NOTE
Call Home status only displays for Fabric OS products.
DomainID —The domain ID of the product.

Product Type—The type of product (switch, Layer 2 switch, router, or director).

•
Right arrow buttons (top) — Click to assign the selected product to the selected Call Home
center (refer to "Assigning a device to the Call Home center"
no product is selected in the Products List or when more than one Call Home center is
selected in the Call Home Centers list.
•
Left arrow button (top) — Click to remove the selected product from the selected Call Home
center (refer to "Removing a device from a Call Home center"
when no product or Call Home center is selected in the Call Home Centers list.
•
Call Home Event Filters list — Displays all Call Home event filters. This list displays the
following information:
Filter Name—The name of the event filter.

Description—The description of the event filter.

•
Add button — Click to open the Call Home Event Filter dialog box and add an event filter
(refer to "Defining an event filter"
•
Edit button — Click to open the Call Home Event Filter dialog box and edit an event filter
(refer to "Defining an event filter"
•
Remove button — Click to remove the event filter (refer to
the Call Home Event Filters list"
•
Find button (>) — Click to find all instances of the selected event filter in the Call Home
Centers list.
•
Right arrow button (bottom) — Click to assign the selected event filter (refer to
an event filter to a Call Home center"
on page 185) to the selected Call Home center or product. Disabled when no event filter is
selected in the Call Home Event Filters list.
•
Left arrow button (bottom) — Click to remove the selected event filter (refer to
all event filter from a Call Home center"
device" on page 187) from the selected Call Home center or product. Disabled when no
event filter, product, or Call Home center is selected in the Call Home Centers list.
on page 184).
on page 184).
on page 187) from the Call Home Event Filters list.
on page 185 or "Assigning an event filter to a device"
on page 186 or "Removing an event filter from a
Brocade Network Advisor SAN User Manual
on page 183). Disabled when
on page 183). Disabled
"Removing an event filter from
"Assigning
"Removing
53-1002696-01