5. Do either of the following:
Viewing and clearing statistics for tape LUNs in a container
To view or clear statistics for tape LUNs in a container, follow these steps:
1. Select Configure > Encryption from the menu task bar to display the Encryption Center
2. Select a group, switch, or engine from the Encryption Center Devices table that contains the
FIGURE 310
3. Select Tape as the container of type for which to display or clear statistics, then click Statistics.
Brocade Network Advisor SAN User Manual
53-1002696-01
•
Host Port WWN: The WWN of the host port that is being used for the write operation.
•
A Refresh button updates the statistics on the display since the last reset.
•
A Clear button resets all statistics in the display.
•
Click Clear to clear the tape LUN statistics, then click Yes to confirm.
•
Click Refresh to view the current statistics cumulative since the last reset.
dialog box (Refer to
Figure 185
storage device to be configured, then select Group/Switch/Engine > Targets from the menu
task bar.
NOTE
You can also select a group, switch, or engine from the Encryption Center Devices table, then
click the Targets icon.
The Encryption Targets dialog box displays
containers is displayed.
Encryption Targets dialog box
The Tape LUN Statistics dialog box displays
members of the selected tape container are displayed.
on page 526).
(Figure
310). A list of configured crypto target
(Figure
311). The statistics for all LUNs that are
Tape LUN statistics
20
667