20
Creating a new encryption group
FIGURE 235
1. Enter the IP address or host name for the primary key vault. If you are clustering DPM
2. Enter the name of the file that holds the Primary Key Vault's CA Key Certificate or browse to the
3. If you are implementing encryption on data replication LUNs used by the EMC Symmetrix
4. Click Next.
598
Select Key Vault dialog box for DPM
appliances for high availability, IP load balancers are used to direct traffic to the appliances.
Use the IP address of the load balancer.
desired location.
Remote Data Facility (SRDF), you must select Enabled for REPL Support.
The Specify Certificate Signing Request File Name dialog box displays
(Figure
236).
Brocade Network Advisor SAN User Manual
53-1002696-01