Top Port C3 Discards Rx To Monitor - Brocade Communications Systems StoreFabric SN6500B User Manual

Top Port C3 Discards RX TO monitor

The Top Port C3 Discards RX TO monitor
frames received at this port and discarded at the transmission port due to timeout in a table.
FIGURE 67
The Top Port C3 Discards RX TO monitor includes the following data:
•
•
•
•
•
•
•
•
•
•
To customize the monitor to display data by a selected time frame as well as customize the display
options, refer to
Accessing additional data from the Top Port C3 Discards RX TO monitor
•
•
Brocade Network Advisor SAN User Manual
53-1002696-01
Top Port C3 Discards RX TO monitor
Severity icon/monitor title— The worst severity of the data shown next to the monitor title.
Port — The port affected by this monitor.
C3 Discards RX TO/sec — The top ports with receive Class 3 frames received at this port and
discarded at the transmission port due to timeout in seconds.
Product — The product affected by this monitor.
Type — The type of port (for example, U-Port).
Identifier — The port identifier.
Port Number— The port number.
State — The port state (for example, Enabled).
Status — The port status (for example, Up).
Refreshed — The refresh time and selected time range for the monitor.
"Editing a preconfigured performance monitor"
Right-click a row in the monitor to access the shortcut menu available for the associated
device. For more information about shortcut menus, refer to
page 1071.
In a Top N or Bottom N C3 Discards TX TO and C3 Discards RX TO monitors, right-click an
FC-port row and select Discarded Frames to navigate to the Discarded Frames dialog box. For
more information, refer to
Performance Dashboard monitors
(Figure 67) displays the top ports with receive Class 3
"Viewing discarded frames from a port"
on page 220.
"SAN shortcut menus" on
on page 352.
8
207