11. Enter your user name and password.
12. Click Login.
13. Click OK on the Login Banner.
Viewing active sessions
To view the Management application active sessions, complete the following steps.
1. Select Server > Active Sessions.
2. Review the active session information.
3. Click Close.
Brocade Network Advisor SAN User Manual
53-1002696-01
The defaults are Administrator and password, respectively.
NOTE
Do not enter Domain\User_Name in the User ID field for LDAP server authentication.
NOTE
When you launch the Management application or navigate to a new view, the SAN tab displays
with a gray screen over the Product List and Topology Map while data is loading.
The Active Sessions dialog box displays
FIGURE 4
Active Sessions dialog box
The following information displays:
•
ID—Displays the name of the user (for example, Administrator).
•
Description—Displays the description of the user (for example, Operator).
•
Network Address—Displays the network address of the user.
•
Client Type—Displays the type of Management application client.
•
Connected—Displays the date and time the user connected to the server.
Management server and client
(Figure
5).
1
9