Creating A Layer 2 Acl From A Saved Configuration - Brocade Communications Systems StoreFabric SN6500B User Manual

17
Layer 2 access control list management
4. Select the Assign ACL option and choose one of the following options from the first Assign ACL
5. Select the ACL you want to assign to the port from the second Assign ACL list.
6. Select the Write to Product check box to create the selected ACL on the device if it does not
7.
Clearing Layer 2 ACL assignments (Fabric OS)
To clear Layer 2 ACL configuration from interfaces, complete the following steps.
1. Select Configure > Security > Layer 2 ACL > Port.
2. Select a port or LAG in the Available Ports list and click the right arrow button.
3. Click OK.
4. Select the Clear ACL Assignment option.
5. Click OK on the Device_Name - Port_Number/LAG LAG_Number - Layer 2 ACL Configuration

Creating a Layer 2 ACL from a saved configuration

To create a Layer 2 ACL from a saved configuration, complete the following steps.
1. Select the device and select Configure > Security > Layer 2 ACL > Product.
2. Select From Saved Configurations from the Add list.
3. Select one or more configurations to add to the new Layer 2 ACL configuration.
496
list:
•
Select ACLs on this Product to assign ACLs deployed on the product to the port.
The second list is populated with the ACLs deployed on the switch or associated with a
save deployment object.
•
Select ACLs bound to this port to assign ACLs bound to the interface to the port.
The second list is populated with the ACLs bound to the interface.
•
Select Deployment_Name (a user-configured deployment) to assign a user-configured
deployment on the port.
already exist.
Click OK on the Device_Name - Port_Number - Layer 2 ACL Configuration dialog box.
The Deploy to Ports - Layer 2 ACL dialog box displays. To deploy the configuration, refer to
"Security configuration deployment"
The Port Selection - Layer 2 ACL dialog box displays.
LAGs display in the Available Ports list using the following convention: Po LAG_Number.
The Device_Name - Port_Number/LAG LAG_Number - Layer 2 ACL Configuration dialog box
displays.
dialog box.
The Deploy to Ports - Layer 2 ACL dialog box displays. To deploy the configuration, refer to
"Security configuration deployment"
The Device_Name - Layer 2 ACL Configuration dialog box displays.
The Layer 2 ACL Saved Configurations dialog box displays.
on page 498.
on page 498.
Brocade Network Advisor SAN User Manual
53-1002696-01