Distribution Performance Monitors - Brocade Communications Systems StoreFabric SN6500B User Manual

8
User-defined performance monitors
•
•
•
•
•
•
•
•
To configure a port performance monitor, refer to
monitor"
Accessing additional data from top or bottom port monitors
•
•

Distribution performance monitors

The distribution performance monitor
ports for each of the five percentage ranges defined for the selected measure in a bar graph.
FIGURE 82
224
Measure_Type — The percentage bar of the selected measure. Depending on the selected
measure, more than one Measure_Type may display.
By default, ports display sorted by the Measure_Type value (Top ports sort from highest to
lowest and bottom ports sort lowest to highest). Click a column head to sort the columns by
that value.
Product — The product affected by this monitor.
Type — The type of port (for example, U-Port).
Identifier — The port identifier.
Port Number— The port number.
State — The port state (for example, Enabled).
Status — The port status (for example, Up).
Refreshed — The refresh time and selected time range for the monitor.
on page 230.
In a Top N or Bottom N monitor, double-click a row or right-click a row and select Show
Graph/Table to navigate to the Custom: Historical Performance Graph dialog box for the
selected measures. For more information, refer to
performance graph" on page 909.
Right-click a row in the monitor to access the shortcut menu available for the associated
device. For more information about shortcut menus, refer to
page 1061.
Distribution performance monitor example
"Configuring a user-defined port performance
"Generating and saving a historical
(Figure 82) displays the distribution (number) of products or
Brocade Network Advisor SAN User Manual
"Application menus" on
53-1002696-01