FIGURE 302
4. Click Add.
FIGURE 303
5. Select a host from the Host list.
Brocade Network Advisor SAN User Manual
53-1002696-01
Encryption Target Tape LUNs dialog box
The Add Encryption Target Tape LUNs dialog box displays
the storage device that are visible to hosts is displayed. LUNs are identified by the Host world
wide name, LUN number, Volume Label Prefix number, and Enable Write Early ACK and Enable
Read Ahead status. The LUN numbers may be different for different hosts.
Add Encryption Target Tape LUNs dialog box
Before you encrypt a LUN, you must select a host, then either discover LUNs that are visible to
the virtual initiator representing the selected host, or enter a range of LUN numbers to be
configured for the selected host.
Adding target tape LUNs for encryption
(Figure
303). A table of all LUNs in
20
659