Adding Thresholds; Adding A C3 Discard Frames Threshold - Brocade Communications Systems StoreFabric SN6500B User Manual

Adding thresholds

NOTE
This feature requires a Trial or Licensed version.
The Management application allows you to create Invalid CRCs, Invalid words, Link, Link Reset,
Protocol Error, Security, and Sync Loss thresholds.

Adding a C3 Discard Frames threshold

NOTE
This threshold is only available for Fabric OS devices running 6.3 or later.
Use to block a port when a C3 Discard Frames violation type meets the Fabric OS switch threshold.
For default threshold values for Fabric OS devices, refer to Chapter 7 of the Fabric Watch
Administrator's Guide.
To add an C3 Discard Frames threshold, complete the following steps.
1. Select Monitor > Fabric Watch > Port Fencing.
2. Select C3 Discard Frames (Fabric OS only) from the Violation Type list.
3. Click Add.
Brocade Network Advisor SAN User Manual
53-1002696-01
The Port Fencing dialog box displays
FIGURE 366
Port Fencing dialog box
The Add C3 Discard Frames Threshold dialog box displays.
(Figure 366).
24
Adding thresholds
813