11
Services tab
Starting all services
NOTE
The Start button restarts running services in addition to starting stopped services which causes
client-server disconnect.
To start all services, complete the following steps.
1. Launch the Server Management Console.
2. Click the Services tab.
3. Click Start to start all services.
4. Click Close to close the Server Management Console.
Restarting all services
To stop and restart all services, complete the following steps.
1. Launch the Server Management Console.
2. Click the Services tab.
3. Click Restart to stop then restart all services.
4. Click Close to close the Server Management Console.
Changing the database password
Requires User Management read and write privilege.
1. Launch the Server Management Console.
2. Click the Services tab.
3. Click Change Database Password.
4. Enter your database user name and password.
5. Click OK.
292
NOTE
If the server is configured to use an external FTP server, the Server Management Console does
not attempt to start the built-in FTP service.
NOTE
If the server is configured to use an external FTP server, the Server Management Console does
not attempt to start the built-in FTP service.
The authentication Login dialog box displays.
The Database Password dialog box displays.
Brocade Network Advisor SAN User Manual
53-1002696-01