Brocade Communications Systems StoreFabric SN6500B User Manual page 175

Configuring an external FTP, SCP, or SFTP server
NOTE
For FIPS-enabled Fabric OS switches, you must configure the FTP/SCP/SFTP server communication
to an external SCP or SFTP server to download firmware and allow technical support.
NOTE
SCP is supported on Fabric OS devices running 5.3 and later.
NOTE
SFTP is supported on Fabric OS devices running 7.0 and later.
To configure external FTP, SCP, or SFTP server settings, complete the following steps.
1. Select Server > Options.
2. Select FTP/SCP/SFTP in the Category list.
3. Select the Use External FTP Server and/or SCP Server option.
4. To configure an external FTP server, complete the following steps.
Brocade Network Advisor SAN User Manual
53-1002696-01
The Options dialog box displays.
The FTP/SCP/SFTP pane displays
FIGURE 43
Options dialog box (FTP/SCP/SFTP pane)
a. Select the FTP Server check box to configure the external FTP server.
All fields are mandatory.
b. Enter the IP address for the remote host in the Remote Host IP field.
c. Enter a user name in the Remote Host User Name field.
d. Enter the path to the remote host in the Remote Directory Path field.
Use a slash (/) or period (.) to denote the root directory. Do not give an absolute path.
e. Enter the password in the Password Required for FTP field.
Software Configuration
(Figure 43).
5
127