Adding an Invalid CRCs threshold
NOTE
This threshold is only available for Fabric OS devices.
NOTE
This feature requires a Trial or Licensed version.
Use to block a port when an Invalid CRC violation type meets the Fabric OS switch threshold. For
default threshold values for Fabric OS devices, refer to Chapter 7 of the Fabric Watch
Administrator's Guide.
To add an Invalid CRCs threshold, complete the following steps.
1. Select Monitor > Fabric Watch > Port Fencing.
2. Select Invalid CRCs (Fabric OS only) from the Violation Type list.
3. Click Add.
4. Enter a name for the threshold in the Name field.
5. Select one of the following options:
6. Enter the number of invalid CRCs allowed for the threshold in the Threshold errors field.
7.
Brocade Network Advisor SAN User Manual
53-1002696-01
The Port Fencing dialog box displays.
The Add Invalid CRCs Threshold dialog box displays.
FIGURE 368
Add Invalid CRCs Threshold dialog box
•
Default — Uses device defaults. Go to
•
Custom — Uses your selections. Continue with
Select the time period for the threshold from the errors per list. The following choices are
available:
•
None — the port is blocked as soon as the specified number of invalid CRCs allowed is
met.
•
Second — the port is blocked as soon as the specified number of invalid CRCs allowed is
reached within a second.
•
Minute — the port is blocked as soon as the specified number of invalid CRCs allowed is
reached within a minute.
•
Hour — the port is blocked as soon as the specified number of invalid CRCs allowed is
reached within a hour.
•
Day — the port is blocked as soon as the specified number of invalid CRCs allowed is
reached within a day.
Adding thresholds
step
8.
step
6.
24
815