Brocade Communications Systems StoreFabric SN6500B User Manual page 867

4. Enter a name for the threshold in the Name field.
5. Select the Fabric OS check box.
6. Click OK to add the protocol errors threshold to the table and close the Add Protocol Error
7.
Brocade Network Advisor SAN User Manual
53-1002696-01
FIGURE 371
Add Protocol Error Threshold dialog box
a. Select one of the following options:
•
Default — Uses device defaults. Go to
•
Custom — Uses your selections. Continue with
b. Enter the number of protocol errors allowed for the threshold from the Threshold errors
field.
c. Select the time period for the threshold from the errors per list. The following choices are
available:
•
None — the port is blocked as soon as the specified number of protocol errors allowed
is met.
•
Second — the port is blocked as soon as the specified number of protocol errors
allowed is reached within a second.
•
Minute — the port is blocked as soon as the specified number of protocol errors
allowed is reached within a minute.
•
Hour — the port is blocked as soon as the specified number of protocol errors allowed
is reached within a hour.
•
Day — the port is blocked as soon as the specified number of protocol errors allowed is
reached within a day.
Threshold dialog box.
To assign this threshold to fabrics, switches, or switch ports, refer to
page 821.
Click OK on the Port Fencing dialog box.
Adding thresholds
step 6.
step b.
"Assigning thresholds"
24
on
819