Inheriting Alert Parameters From A Switch; Another - Brocade Communications Systems StoreFabric SN6500B User Manual

29
Bottleneck detection
7.
8. Click the right arrow to apply the settings in the Bottleneck Detection pane to the selected
9. Click OK or Apply to save your changes.

Inheriting alert parameters from a switch

When you enable bottleneck detection on a switch, all eligible ports on that switch inherit the same
bottleneck parameters as the switch. You can then change the parameters for specific ports or
exclude specific ports from bottleneck detection.
Use the following procedure if you want to restore the switch bottleneck parameters to a port that
has direct assigned settings.
1. Select Monitor > Performance > Bottlenecks.
2. Select a port that has directly assigned bottleneck settings, which is indicated by a right arrow
3. Click Inherit From Switch.
4. Select the Alerts check box to enable alerts. Clear this check box to disable alerts.
5. Click OK or Apply to save your changes.
Copying alert parameters from one switch or port to another
1. Select Monitor > Performance > Bottlenecks.
2. Select the switch or port from which you want to copy the bottleneck parameters.
3. Click the left arrow.
4. Select one or more switches, ports, or fabrics to which you want to copy the bottleneck
926
Select one or more fabrics, switches, or ports from the Products/Ports list.
You can select fabrics or switches or ports, but you cannot select a mix of fabrics, switches,
and ports.
elements in the Products/Ports list.
If you selected one or more ports, a right arrow displays in the Direct Assigned column for
these ports, indicating that the alert parameters for the ports override the alert parameters for
the switch.
If you selected switches or fabrics, the alert parameters are changed for all of the eligible ports
in those switches and fabrics except for the ports that had been directly assigned alert
parameters previously.
The Bottlenecks dialog box displays.
in the Direct Assigned column.
The bottleneck parameters that are specified for the switch are applied to the port.
The Bottlenecks dialog box displays.
The parameters display in the Bottleneck Detection pane.
parameters.
You can select fabrics or switches or ports, but you cannot select a mix of fabrics, switches,
and ports.
Brocade Network Advisor SAN User Manual
53-1002696-01