12
Port commissioning overview
Viewing existing CIMOM servers
NOTE
Port commissioning is only supported on Fabric OS devices running Fabric OS 7.1 or later.
Before you can decommission or recommission an F-Port, you must register the CIMOM servers
within the fabric affected by the action.
1. Select Configure > Port Commissioning > Setup.
368
The Port Commissioning Setup dialog box displays
FIGURE 135
Port Commissioning Setup dialog box
The Port Commissioning Setup dialog box has two main areas. The Add/Edit Systems and
Credentials area enables you to register CIMOM servers (system and credentials) one at a time
and contains the following fields and components:
•
Network Address — Enter the IP address (IPv4 or Ipv6 format) or host name of the CIMOM
server in the field.
•
Description — (Optional) Enter a description of the CIMOM server in the field. The
description cannot be over 1024 characters.
•
CIMOM Port — Enter the CIMOM port number for the CIMOM server in the field. The default
port number is 5989.
•
Namespace — Enter the namespace of the CIM_FCPort in the field. The default
namespace is root/cimv2.
•
Credentials - User ID (Optional) — Enter a user identifier for the CIMOM server in the field.
The credentials user identifier cannot be over 128 characters.
•
Credentials - Password (Optional) — Enter a password in the field. The password cannot be
over 512 characters.
•
Left arrow button — Select a CIMOM server in the Systems List and click to move the
defined CIMOM server credentials to the Add/Edit Systems and Credentials area for
editing or deletion.
•
Right arrow button — Click to move the defined CIMOM server credentials form the
Add/Edit Systems and Credentials area to the Systems List.
The Systems List details the defined CIMOM server and contains the following data:
•
Network Address — The IP address (IPv4 or Ipv6 format) or host name of the system.
(Figure
135).
Brocade Network Advisor SAN User Manual
53-1002696-01