20
Tape LUN statistics
3. Select a tape target storage device, then click LUNs.
FIGURE 308
4. Select the LUN or LUNs for which to display or clear statistics, then click Statistics.
FIGURE 309
666
The Target Tape LUNs dialog box displays
displayed.
Target Tape LUNs dialog box
The Tape LUN Statistics dialog box displays
LUN or LUNs you selected is displayed. Tape LUN statistics are cumulative.
Tape LUN Statistics dialog box
The dialog box contains the following information:
•
LUN #: The number of the logical unit for which statics are displayed.
•
Tape Volume/Pool: The tape volume label of the currently-mounted tape, if a tape session
is currently in progress.
•
Tape Session #: The number of the ongoing tape session.
•
Uncompressed blocks: The number of uncompressed blocks written to tape.
•
Compressed blocks: The number of compressed blocks written to tape.
•
Uncompressed Bytes: The number of uncompressed bytes written to tape.
•
Compressed Bytes: The number of compressed bytes written to tape.
(Figure
308). A list of the configured tape LUNs is
(Figure
309). The statistic results based on the
Brocade Network Advisor SAN User Manual
53-1002696-01