Clear Cos All-Entries; Show Cos Port-Type - Enterasys SecureStack C2 C2G170-24 Configuration Manual

Port Type
---------
0
This examples shows flood control unit information.
C2(su)->show cos unit flood-ctrl
Type:
flood-ctrl = flood control type
Port Type
-----------
0

clear cos all-entries

Use this command to clear all Class of Service entries except entries 0‐7.
Syntax
clear cos all-entries
Parameters
None.
Defaults
None.
Mode
Switch command, read‐write.
Example
This example shows how to clear the CoS configuration for all entries except entries 0‐7:
C2(su)->clear cos all-entries

show cos port-type

Use this command to display Class of Service port type configurations.
Syntax
show cos port-type [irl [port-type]] [flood-ctrl [port-type]]
Parameters
irl
flood‐ctrl
port‐type
Type Unit Maximum Rate
---- ---- ------------
irl Kbps 1000000
Type Unit
----------- ----
flood-ctrl pps
(Optional) Displays inbound rate limiting information.
(Optional) Displays flood control information.
(Optional) Displays information for a specific port type. (Only port type
0 is supported.)
Minimum Rate Granularity
------------ -----------
64 1
Unit:
pps = packets per second
Maximum Rate Minimum Rate
------------ ------------
148810 0
SecureStack C2 Configuration Guide 11-35
clear cos all-entries
Granularity
-----------
1